Latest Products http://www.goelsteelemporium.in Latest Products 17-07-11 en-us http://www.goelsteelemporium.in P20 Plastic Mould Steel Plates http://www.goelsteelemporium.in/p20-plastic-mould-steel-plates.htm Wed, 26 Oct 2016 00:00:00 +0530 From the point of view of marketing, shipping, and handling, our products are securely packed in top-grade supplies using ultramodern packaging machines. The packaging is extremely reliable. Buyers are required to place orders; timely deliveries of consignments are our primary concern.   Delivery condition : Pre-hardened - 30-36HRCApplications : P20 is suitable for general toy mould, lower core of small / medium plastic mould (inner mould ), and Test mould for plastic products. Characteristics : The steel is 100% subject to ultrasonic defect detection and free of air bubbles and sir porosity. The steel is supplied in pre-hardened state (30-36HRC) and suitable for direct moulding. P20 Ni Plastic Mould Steel Plates http://www.goelsteelemporium.in/p20-ni-plastic-mould-steel-plates.htm Wed, 26 Oct 2016 00:00:00 +0530 Being a client-centric firm, we offer secure payment procedure in both online and offline modes. The procedure is developed by our adroit professionals and approved by the authority. For our buyers in Delhi(India) and other markets, we provide a vast array of the product at competitive prices.   Applications : Injection die, extrusion die, compression mould, blowing die and absorbing mould that applicable to  All kinds of plastics, are commonly used as dies for housing of such products as air conditioner, Washing machine, computer monitor, printer and fax machine which have higher requirements on The smoothness of surface. General : Uniform hardness across the cross-section Very good polish ability Good machinability Hard enable and temperable plastic mould steel Nitridable Suitable for chrome plating Product Description Hot rolled, Pre-harden &tempering, black surface Hardness : 30~36HRC Hot rolled technology : EAF+LF+VD 2083 Grade Stavax Steel Plates http://www.goelsteelemporium.in/2083-grade-stavax-steel-plates.htm Tue, 06 Jun 2017 00:00:00 +0530 We ensure the products we provide buyers with are as per international quality management systems. Owing to our reliable transportation facilities, we are able to deliver the orders at the desired destination and on promised time.   Delivery Condition : Annealed - Less than 230HBApplication : Suitable for making of the moulds to be used under weak acid and wet environmentCharacteristics : Superior resistance to carrions, no special care or maintenance needed for the mould Smelted by using vacuum degassing, so that the steel quality is more purified, the structure is even and dense and the Polish property is excellent. H11 Steel Round Bars http://www.goelsteelemporium.in/h11-steel-round-bars.htm Wed, 26 Oct 2016 00:00:00 +0530 We make sure that the products we offer to our clients will remain free from any kind of damage. Thus, we store the entire lot under secured environment in our capacious warehouse. The company laid its foundation stone in Delhi(India) and caters to the market with its wide range.   Application : H11 tool steel are suitable for designing highly stressed structural parts. H13 Tool Steel Round Bars http://www.goelsteelemporium.in/h13-tool-steel-round-bars.htm Wed, 26 Oct 2016 00:00:00 +0530 With strong industrial experience, we make sure that the packaging is done as per the stated norms, by this; the products that we deliver are absolutely safe from the getting damaged. Our team members give you varied payment options such as, you can make online or offline transactions. You can hand over exact amount or you can opt for offline payment modes.   Standard and Grade : AISI H13, JIS SKD61, ASSAB8407, DIN1.2344. Applications : Suitable for making of aluminum, zinc and copper alloy extrusion dies, casting dies and hot shearing blades, etc Small silver Polish steel (scaled and cold drawn), which is an ideal material for ejection pins and sleeves. Also suitable for manufacture of plastic molds of high productiveity and long service life. Characteristics : Our H13 is general-purpose hot die steel containing chromium-molybdenum-vanadium (Cr-Mo-V) alloy with thecharacteristics. It is applicable to be used in die-casting, hot extrusion and hot forging die, with advantages as follows : With good cold-hot fatigue resistance With high thermal strength under the high temperature of 600º C With good fracture toughness and ductility With good dimensional stability for heat treatment and hardenability With good polishing performance. H11 Tool Steel Plates http://www.goelsteelemporium.in/h11-tool-steel-plates.htm Tue, 25 Oct 2016 00:00:00 +0530 We own a well-structured warehouse with the help of which we are capable of delivering a flawless range of products. So, you can stay rest assured with us for damage-free products. No third party involvement is there while transactions, we keep the details confidential, as we known the security issues involved while making online payment. We make available offline payment options for you in case you don't want to opt for other mode.   Application : H11 tool steel are suitable for designing highly stressed structural parts. H13 Tool Steel Plates http://www.goelsteelemporium.in/h13-tool-steel-plates.htm Tue, 25 Oct 2016 00:00:00 +0530 As a quality-conscious firm, we make sure that the offered lot is sternly packed using the best quality packaging material. However, we source the packaging material from the genuine vendors. Based is Delhi(India), we are entrusted with the chore of providing top-notch products in the domestic market.   Standard and Grade : AISI H13, JIS SKD61, ASSAB8407, DIN1.2344. Applications : Suitable for making of aluminum, zinc and copper alloy extrusion dies, casting dies and hot shearing blades, etc Small silver Polish steel (scaled and cold drawn), which is an ideal material for ejection pins and sleeves. Also suitable for manufacture of plastic molds of high productiveity and long service life.Characteristics : Our H13 is general-purpose hot die steel containing chromium-molybdenum-vanadium (Cr-Mo-V) alloy with thecharacteristics. It is applicable to be used in die-casting, hot extrusion and hot forging die, with advantages as follows : With good cold-hot fatigue resistance With high thermal strength under the high temperature of 600º C With good fracture toughness and ductility With good dimensional stability for heat treatment and hardenability With good polishing performance. D2 Tool Steel Round Bars http://www.goelsteelemporium.in/d2-tool-steel-round-bars.htm Tue, 25 Oct 2016 00:00:00 +0530 We are situated in Delhi(India) and have established a fine network with the help of which we ensure timely delivery. We have become a preferred choice of the patrons owing to our timeliness and client centric approach.   Standard and Grade : GB Cr12MOV/ AISI D2/JIS SKD11/ ASSAB XW-42/ DIN 1.2379Delivery Condition : Soften Annealed - Less than 255HBApplications : Sheet less than 6mm thick, efficient blanking dies, punch dies and stamping dies. Various scissors, interlaid razor blades and wood cutting blades Thread rolling dies and abrasion resistant sliders Cold forged dies, thermoset resin molding molds and high-grade gauges, etc Deep-drawing dies and cold extrusion dies Characteristics : Our D2 is an alloy tool steel with high content of carbon and chrome. After heat treatment, it has very high hardness and abrasion resistance. This steel also features in high hardenability and good dimensional stability. It is suitable for manufacture of cold-work dies and thermoset plastic molding molds which require high precision and long service life. Pure steel quality due to vacuum degas refining treatment Superior cutting performance, due to spheroidal annealing softening treatment  Crushed crystal structure bonded by forging and rolling, carbonized granules which are fine and even. So that there will be no cracking under quenching For special adding of reinforcing elements molybdenum and vanadium, both the avrasion resistance and toughness are better the similar steel grade. D3 Tool Steel Round Bars http://www.goelsteelemporium.in/d3-tool-steel-round-bars.htm Tue, 25 Oct 2016 00:00:00 +0530 We procure the basic material, required for manufacturing flawless lot of products, from the genuine and authorized vendors only. As a result of which, our offerings have no match in the market. Customers should stay rest assured with us for the payment procedures. We practice online payment processing with the assistance of a secured payment gateway that is supported by credit, purchase, and PINless debit cards.   Delivery Condition : Soften Annealed - 255HBApplication : Our D3 has excellent wear-resisting performance. It is mainly used for long-life punching die, blanking die, drawing die, press rolling die, edge rolling die that are designed for processing the sheet metal with thickness not greater than 2mm.It is also widely used for ceramic dies. It is also used for making various scissors, crushing cutters for waste plastics etc. Features : Our D3 is a high-carbon and high-chromium alloy tool steel. It features good size stability after heat treatment, strong harden ability, high quenching hardness and high compressive strength. It is suitable for making the high-precision and long-life cold work die. D2 Tool Steel Flats http://www.goelsteelemporium.in/d2-tool-steel-flats.htm Tue, 25 Oct 2016 00:00:00 +0530 With excellent storage facility, we can effortlessly fulfill urgent and massive requirements of the customers. Also, we maintain complete records of the delivered products. With our years of experience, our company name figures amidst the most responsive and responsible Suppliers of D2 Tool Steel Flats.   Standard and Grade : GB Cr12MOV/ AISI D2/JIS SKD11/ ASSAB XW-42/ DIN 1.2379Delivery Condition : Soften Annealed - Less than 255HBApplications : Sheet less than 6mm thick, efficient blanking dies, punch dies and stamping dies. Various scissors, interlaid razor blades and wood cutting blades Thread rolling dies and abrasion resistant sliders Cold forged dies, thermoset resin molding molds and high-grade gauges, etc Deep-drawing dies and cold extrusion dies Characteristics : Our D2 is an alloy tool steel with high content of carbon and chrome. After heat treatment, it has very high hardness and abrasion resistance. This steel also features in high hardenability and good dimensional stability. It is suitable for manufacture of cold-work dies and thermoset plastic molding molds which require high precision and long service life. Pure steel quality due to vacuum degas refining treatment. Superior cutting performance, due to spheroidal annealing softening treatment. Crushed crystal structure bonded by forging and rolling, carbonized granules which are fine and even. So that there will be no cracking under quenching. For special adding of reinforcing elements molybdenum and vanadium, both the avrasion resistance and toughness are better the similar steel grade. D3 Tool Steel Flats http://www.goelsteelemporium.in/d3-tool-steel-flats.htm Tue, 25 Oct 2016 00:00:00 +0530 All our payment methods are practical and convenient. A method is agreed upon by us with you at the time of undertaking to ensure no confusion or problem arises later on. With the complete help and support of our team members and management, we conduct strict checking on the quality of raw inputs used for manufacturing.   Delivery Condition : Soften Annealed - 255HBApplication : Our D3 has excellent wear-resisting performance. It is mainly used for long-life punching die, blanking die, drawing die, press rolling die, edge rolling die that are designed for processing the sheet metal with thickness not greater than 2mm. It is also widely used for ceramic dies. It is also used for making various scissors, crushing cutters for waste plastics etc. Features : Our D3 is a high-carbon and high-chromium alloy tool steel. It features good size stability after heat treatment, strong harden ability, high quenching hardness and high compressive strength. It is suitable for making the high-precision and long-life cold work die. C45 Steel Plates http://www.goelsteelemporium.in/c45-steel-plates.htm Mon, 05 Jun 2017 00:00:00 +0530 We ensure that the delivery schedule should be properly maintained in order to meet the exact requirements of the customers. We are one of the esteemed names in the market situated in Delhi(India) and offering the best deals.   Features : Perfect dimension High tensile strength Rugged construction Highly durable Low maintenance.   Delivery Hardness : <=220HB C45 Steel Blocks http://www.goelsteelemporium.in/c45-steel-blocks.htm Mon, 05 Jun 2017 00:00:00 +0530 We are one of the leading names engaged in supplying an extensive array of C45 Steel Blocks. We give our patrons the choice to make payments online or offline. Our company understands the concerns of its customers. Therefore, we make sure our payment options are safe.   Features : Perfect dimension High tensile strength Rugged construction Highly durable Low maintenance Delivery Hardness : <=220HB. C45 Steel Round Bar http://www.goelsteelemporium.in/c45-steel-round-bar.htm Mon, 05 Jun 2017 00:00:00 +0530 Located at Delhi(India), we are reckoned for providing excellent array of products throughout the country. We have a spacious warehouse that is well designed and properly maintained wherein the entire range is securely stored. Our unit is installed with all required amenities essential for safe storage. Stainless Steel Storage Tank Body Plate http://www.goelsteelemporium.in/stainless-steel-storage-tank-body-plate.htm Mon, 05 Jun 2017 00:00:00 +0530 Our products are packed under controlled conditions to ensure their quality is not compromised and buyers are presented with brand new products. We have an ultramodern facility to pack our products. Wholesale as well as retail consignments of the goods can be undertaken by us with ease. In addition, we promise to make as per schedule delivery.